Air Cooler Buying Guide

a woman in gray shirt using a laptop

Air coolers are a good alternative to air-conditioners, for those who can’t afford them and for those who live in dry areas. It is based on a very simple principle – water is put into a cooler, which is circulated by a pump and sprinkled continuously on to fiber pads. This continuous motion evaporates all the heat and cools the air, which is then thrown out into the room, thereby cooling it.
Before you buy a cooler, it’s sensible to analyse why you want to buy a cooler. Firstly, a cooler will give slightly dampened cooling, so it is not very conducive to humid climates. However, it is the ideal cooling option in a dry climate, as it will give you the much-needed moisture along with a welcome respite from the heat. Also, you need to figure out the capacity of the cooler you’ll need. A capacity smaller than what’s needed could defeat the purpose and will be a waste of your money. Therefore, gauging your room size and the number of people go in for a suitable capacity.

Types of Air Coolers

Single-stage and two-stage

Single-stage or direct evaporative coolers are by far the most common and are categorised primarily by pad style. These are extensively available in most stores in our country. Then there are window-mounted coolers. This is a low-cost installation model and is the most commonly used.

Air Cooler Buying Guide

Compare India
eProdz (Only for registered users)
Usha Lexus


Thickness of Pads

Pad thickness is vital to get good performance – pads in conventionally designed coolers should generally be at least 90 mm thick. Pads should be generally at least 50 mm thick.

Desirable Features

For decades the standard cooler had a two-speed motor, a pump switch, and a continuous bleed system. These features make for a simple reliable cooler. However, the number of features and options available today can be very confusing.

Variable Speed

Variable speed coolers, which come with a regulator (like in fans), are much better, especially for nights, when it gets sufficiently cold. A variable speed cooler is a better option than a two- speed cooler.

Automatic Control

Electronic thermostats are available to vary the fan speed automatically, and switch the pump and fan on and off. Automatic Shutoff Dampers: These are flaps in the discharge of the fan, or in the duct, which opens when the fan starts, and closes when the fan is switched off. They reduce the loss of heat through the cooler, when it is not working. This eliminates the need to cover the cooler with a bag at the end of summer.

Automatic Water Level Controller

The automatic water level controller automatically maintains the water level (which is predetermined and set at the factory) in the water tank. To avail of this facility, a water inlet pipe has to be connected to the inlet pipe provided at the backside of the water tank of the cooler. Also the connection should be such that the water can freely flow into the tank without the operation of any valve etc. The water level controller automatically allows or stops the water from flowing into the water tank. This feature too works on the flotation principle and it prevents flooding.

Water Level Indicator

The water level indicator shows how much water is left in the water tank of the air cooler. This is basically a mechanical lever, which works on the principle of flotation. This feature saves you the trouble of opening the water tank to check on the water level. This will reduce the stress you’ll take with frequent checks of the water level. This indicator will give you a clear indication of when the cooler is running low on water.


Castors are wheels provided at the bottom of the air cooler. Castor wheels are included in the price but trolleys require an extra cost. Castors allow the air cooler to be moved around easily, if required. Now you know all there is to know about an air cooler. To see the latest air coolers click here.

Leave a Reply

Your email address will not be published.